CNC Milling T Slot End Mill CNC Tools T Slot Cutter 4 Flutes End
Milling Cutter
Milling the T Slot
The position of the T-slot is laid out on the workpiece. The throat
depth is determined by considering the thickness of the workpiece
and the maximum and minimum dimensions allowable.
A side milling cutter or an end milling cutter is then selected.
The cutter should be of proper size to mill a slot equal in width
to the throat width prescribed for the T-slot size desired. Cut a
plain groove equal to about 1/16 inch less than the combined throat
depth and head space depth.
Select a T-slot milling cutter for the size T-slot to be cut.
T-slot milling cutters are identified by the T-Slot bolt diameter
and remanufactured with the proper diameter and width to cut the
head space to the dimensions given in Table . Position the T-slot
milling cutter over the edge of the workpiece and align it with the
previously cut groove. Feed the table longitudinally to make the
cut. Flood the cutter and workpiece with cutting oil during this
operation. Figure 8-38 shows a T-slot milling cutter and dimension
locations for T-slots.
Specifications
T550 T-Slot milling cutter series adopt domestic high-quality fine
grain tungsten steel material, flexural strength: 4100mpa, particle
size: 0.8 μm. There are two categories for aluminum and steel
respectively. T-Slot milling cutter for steel is coated by imported
coating equipment (black / copper), specially suitable for
aluminum, copper, ordinary medium and low carbon steel, alloy steel
and other materials processing. With high precision quality
control, and full inspection, all T550 series end mills are
delivered with 100% qualification rate.
| Material | YL10.2 / K30 |
| WC | 90% |
| Co | 10% |
| TRS | >4100N/mm2 |
| Hardness | >92HRA |
| Cutting diameter | 1-20mm |
| A.O.L | 50-100mm |
| Grain size | 0.8 μm |
| Helix angle | 30° |
| Upto | HRC60 |
| Flutes No | 4 Flutes |
| Coating | AlTiN or TiSiN |
| Suitable for | Steel,stainless steel,nickel alloy,Titanium alloy,cast iron,plastic
and other materials |
Standard Sizes
| Name | Size | Slot Thickness |
| T-Slot End Mills/Milling cutters | φ3*φ4*50-4T | 0.5/1/1.5/2 |
| φ4*50-4T | 0.5/1/1.5/2 |
| φ6*50-4T | 0.5/1/1.5/2/2.5/3 |
| φ8*50-4T | 0.5/1/1.5/2/2.5/3 |
| φ10*60-4T | 1/1.5/2/2.5/3/4/5 |
| φ12*60-4T | 1/1.5/2/2.5/3/4/5 |
FAQ
1. Where are your factory located? If I visit your factory, how can
I go there?
Our factory located in Changzhou city, Jiangsu province.
2. What are your main products?
Our main products are carbide cutting tools, including end mill,
face mill, drill bits etc.
3. What raw material you use?
We have rods with 3-4 types hardness, hrc45, hrc55, hrc60,hrc65..
Your work piece hardness decides what rods are suitable for.
5. How to ensure the quality?
We have precision detection machine, quality inspectors check
cutters one by one.
6. How to deal with the cutters under verified?
These under verified cutters are all scraped.
7. I only have the drawings of work pieces? can you design cutters
for me?
Yes, of course, show me work piece drawing, I will show you
cutters’ drawing.
9. How long can you deliver goods?
If we have stock, goods will be shipped by next day, if not in
stock, 7-35 days.
10. Can I choose the color of plastic pipe?
Yes, we have such as black, blue, red, yellow etc. color.
11. Can you make stickers with our logo and laser on cutters’
shanks?
Yes. We can print stickers with your logo and laser on shanks.
Why choose us?
1. Professional research team and sales team.
2. We have our own factory.
3. All products are 100% tested working before sending to you .
4. Quick delivery.
